Pro Xp40 Electrostatic Spray Guns Electrostatic
Air Spray Guns Deliver Expert Performance
Pro Xp40 kV electrostatic air spray gun in a compact, lightweight package
The 40 kV Booster gun gives you the transfer efficiency of a 60 kV gun, in a smaller, more compact size. The longer fluid tube on the High Conductivity (HC) lets you spray lower resistivity material. Pro Xp40 Air Spray electrostatic gun line is available in Standard, High Conductivity and kV Booster models.
Features :
- Internal power supply reduces operator fatigue with no heavy cords to slow them down
- Compact 40 kV Booster gun gives you the transfer efficiency of a 60 kV gun
- Easily adjust gun performance with large, simple-to-use, control knobs
- Made in the USA
- Smooth, curved ergonomic handle fits nicely in your hand for more comfortable spraying
- Rugged, dependable design supported by a three year warranty
- Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco’s requirements
Specifications :
| Electrostatic Air Spray Guns | |
| Maximum Working Fluid Pressure |
0.7 MPa, 7.0 bar
|
| Maximum Working Air Pressure |
0.7 MPa, 7.0 bar
|
| Minimum Air Pressure at Gun Inlet |
0.32 MPa, 3.2 bar
|
| Maximum Fluid Operating Temperature |
48°C
|
| Paint Resistivity Range |
3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels, see instruction manual..
|
| Air Inlet Fitting |
1/4 npsm(m) left-hand thread
|
| Fluid Inlet Fitting |
3/8 npsm(m)
|
| Output Voltage |
Pro Xp40 Models: 40 kVPro Xp60 Models: 60 kVPro Xp85 Models: 85 kV
|
| Maximum Current Draw |
125 microamperes
|
| Sound Power (measured per ISO Standard 9216) |
at 0.28 MPa, 2.8 bar: 90.4 dB(A)at 0.7 MPa, 7.0 bar: 105.4 dB(A)
|
| Sound Pressure (measured 1 m from gun) |
at 0.28 MPa, 2.8 bar: 87.0 dB(A) at 0.7 MPa, 7.0 bar: 99.0 dB(A)
|
| Wetted Parts |
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
|
